papercut
cardglue
foilpacking
injectmold
wireenameling

Coating

Paper Cutting

Foil Packing

Cardboard Gluing

Injection Molding

Wire Enameling

Applications – Production Machinery

1-800-667-7492

Coating and Lamination Machinery Tension
Product: RSC 2800

coatlaminate

Used in a closed loop system to control motor speed and power output, the RSC 2800 Series angle sensor measures the rotary position of floating rollers on the machine.

rsc1

pdficon1

Download RSC28 700 Data Sheet

pdficon2

Download RSC28 600 Data Sheet

Paper Cutting Machine
Product: TLM

papercutter

A TLM Series of touchless linear position sensors measures the travel length of a cylinder. It is connected to a PLC for accurate positioning of the cutting blade.

 

TLM

pdficon3

Download TLM Data Sheet

| TOP OF PAGE |

Cardboard Gluing Machine
Product: RSM 2800 Series

gluemachine

A gluing machine manufacturer needed a sensor for their rack and pinion type paper feeder, to obtain position information enabling automated adjustment of frame position for different types of paper. They wanted to replace an encoder with an absolute sensor that could measure multiple turns and had long life. Novotechnik’s RSM 2800 Series was a perfect match for the application.

rsm2800

pdficon4

Download RSM 2800 Data Sheet

| TOP OF PAGE |

Foil Packaging Machine
Product: SP2841

foilpack

Our customer manufactures machines for wrapping products in foil. In order to hold the draw-off speed of the foil constant, a dancer stirrup which has an angle sensor mounted in its center of motion is used.

A specially designed sensor potentiometer SP2841 in a special design with an anti-deformation socket, cable and M12 cable box is used. The sensor signal affects the frequency converter in such a way that the draw-off speed of the foil remains constant.

SP28

pdficon5

Download RSM 2800 Data Sheet

| TOP OF PAGE |

Injection Molding Machine
Product: LWH or TLH

injection

Injection molding machines, all values relevant to the process of manufacturing thermoplastic and duroplastic items are measured and stored. The positions of various mechanical parts are measured, as well as pressure and temperature. The goal is to achieve a consistently high quality of molded items and a short preparation time during tool changes.

Function: Either the position transducer LWH or TLH is used for measurements, depending on the mechanical construction of the customer's various products. The effective lengths range from 75 mm on ejection pins and dosing cylinders, to 1500 mm on injection molding aggregates and clamping units

Production in shifts, shorter cycle times and low tolerances of the molded items require a high reliability and precision from the employed position measurement system.

LWH

pdficon6

Download LWH Data Sheet

TLH

pdficon7

Download TLH Data Sheet

| TOP OF PAGE |

Wire Enameling Drawing Speed Control
Product: IP 650

speedcontrol

This customer manufactures wire-enameling machines. Novotechnik's IP 6500 rotary potentiometer is mounted on a dancer arm. The dancer controls the speed of the main drive of the drawing machine as a function of the enameling equipment wire-speed. An increase of the diameter of the coil increases the wire speed. The slack in the wire to be coiled-up then becomes smaller. The IP 6500 detects this variation in the dancer arm position, and the speed of the wire coil is reduced accordingly. Thus the take-up speed of the wire is effectively monitored and regulated constantly.

The main criteria for selecting our IP 6500 are long life and the protection degree IP65, because during the manufacturing process of wire-enameling our customer needs to monitor the operation constantly over a fairly small electrical angle.

ip6000

pdficon8

Download IP6000 Data Sheet

| TOP OF PAGE |

   
coatlaminate1